![DIY dog bed. Made from 4x4 post wood, plywood, and 2x6s. Going to sand the corners and paint it all gray, then make a … | Diy dog bed, Wooden dog bed, DIY dog bed. Made from 4x4 post wood, plywood, and 2x6s. Going to sand the corners and paint it all gray, then make a … | Diy dog bed, Wooden dog bed,](https://i.pinimg.com/originals/9e/9e/de/9e9ede2c313e1027fb33704b762dccde.jpg)
DIY dog bed. Made from 4x4 post wood, plywood, and 2x6s. Going to sand the corners and paint it all gray, then make a … | Diy dog bed, Wooden dog bed,
![Easy Build for under $50: Elevated Dog Bed. This was built with a 12 foot 2x4, 4x4 cut at 12” each for the legs, 1/4 plywood, and a dog bed from TJ Easy Build for under $50: Elevated Dog Bed. This was built with a 12 foot 2x4, 4x4 cut at 12” each for the legs, 1/4 plywood, and a dog bed from TJ](https://preview.redd.it/o97bqryfdws51.jpg?width=640&crop=smart&auto=webp&s=a01c8a52808ca5bf99e3574531057cfa28522559)
Easy Build for under $50: Elevated Dog Bed. This was built with a 12 foot 2x4, 4x4 cut at 12” each for the legs, 1/4 plywood, and a dog bed from TJ
![I made a dog bed for my Pupper out of poplar plywoos. Basically a frame for a crib mattress. Legs were bought pre-made. I initially tried box joints for the corners and I made a dog bed for my Pupper out of poplar plywoos. Basically a frame for a crib mattress. Legs were bought pre-made. I initially tried box joints for the corners and](https://i.redd.it/kilng6j1dkz71.jpg)